Fujikura FSM60S-K Fusion Splicer
No stress rentals! We help you to choose the equipment that you need, we expedite shipment, and follow up.
Features & specifications
- Rugged construction providing shock, dust and moisture resistance
- Dual monitor position with automatic image orientation
- Automatic arc calibration and fiber identification
- User-selectable fiber clamping method - sheath clamp or fiber holders
- Auto-start tube heater feature
- Color LCD display with anti-reflective coating for excellent visibility in bright sunlight
- Simultaneous battery charge and splicer operation
- Long life battery (up to 160 splice/heat cycles per charge)
- Detachable work table incorporated into the transit case
- Data and video download software and splicer upgrade software included; software upgrades through PC application via the internet
- Data and video download software and splicer upgrade software included; software upgrades through PC application via the internet
| Applicable Fibers | Single-mode (G.652 & G.657), multimode (G.651), DS (G.653), NZDS (G.655) |
|---|---|
| Cladding Diameter | 80 μm to150 μm |
| Coating Diameter | 100 μm to 1,000 μm |
| Fiber Cleave Length | 8 to 16 mm with 250 μm coating diameter, 16 mm with 900 μm coating diameter |
| Typical Average Splice Loss | 0.02 dB with SM, 0.01 dB with MM, 0.04 dB with DS, 0.04 dB with NZDS, measured by cut-back method relevant to ITU-T and IEC standards |
| Splicing Time | Typical 9 seconds with standard single-mode fiber |
| Arc Calibration method | Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available |
| Splicing modes | 100 preset and user programmable modes |
| Splice Loss Estimate | Based upon dual camera core alignment data |
| Storage of Splice Result | Last 2000 results to be stored in the internal memory |
| Fiber Display | X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation |
| Magnification | 300X for single X or Y view, or 187X for X and Y view |
| Viewing method | Dual cameras with 4.1 inch TFT color LCD monitor |
| Operating Condition | 0 to 5,000 m above sea level, 0 to 95%RH and -10 to 50°C respectively |
| Mechanical Proof Test | 1.96 to 2.25N |
| Tube Heater | Built-in tube heater with 30 heating modes; auto-start function |
| Tube Heating Time | Typical 30 seconds with FP-03 sleeve, 35 seconds with FP3 (40), 35-55 seconds with Fujikura micro sleeves |
| Protection Sleeve Length | 60 mm, 40 mm, micro |
| Splice/Heat Cycles with Battery | Typical 160 cycles with power save functions activated |
| Power Supply | Auto voltage selection from 100 to 240 V AC or 10 to 15 V DC with ADC-11, 13.2 V DC with BTR-08 battery |
| Terminals | USB 1.1 (USB-B type) for PC communication. mini-DIN (6-pin) for HJS-02/03 and SH-8 tube heater |
| Wind Protection | Maximum wind velocity of 15 m/s. (34 mph) |
| Dimensions | 136W x 161D x 143H (mm) / 5.3W x 6.3D x 5.6H (inches) |
| Weight | 2.3 kg (5.1 lbs) with AC adapter ADC-11; 2.7 kg (5.9 lbs) with BTR-08 battery |