Anritsu S332E Site Master™ Cable & Antenna Analyzer

No stress rentals! We help you to choose the equipment that you need, we expedite shipment, and follow up.

Application
The Site Master™ S332E is optimized for antenna measurements. It measures return loss, distance-to-fault, and SWR. It has a built-in Spectrum Analyzer and the Power Meter option uses a built-in detector.

General specifications
Measurements	VSWR, Return Loss, Cable Loss, Distance-to-Fault (DTF) Return Loss, Distance-to-Fault (DTF) VSWR, 1-Port Phase, Smith Chart (50/75 Ω selectable)
Measurement Display	Single/Dual Measurement Display with independent markers
Frequency	Start/Stop, Signal Standard, Start Cal
DTF	Start/Stop, DTF Aid, Units (m/ft), Cable Loss, Propagation Velocity, Cable, Windowing
Windowing	Rectangular, Normal Side Lobe, Low Side Lobe, Minimum Side Lobe
Amplitude	Top, Bottom Auto Scale, Full Scale
Sweep	Run/Hold, Single/Continuous, RF Immunity (High/Low), Data Points, Averaging/Smoothing, Output Power (High/Low), RF Pwr When Hold (On/Off)
Data points	137, 275, 551, 1102, 2204
Markers	Markers 1-6 (On/Off), Delta Makers 1-6 (On/Off), Marker to Peak/Valley, Peak/Valley Auto, Marker Table (On/Off), All Markers Off
Traces	Recall, Copy to Display Memory, No Trace Math, Trace ± Memory, Trace Overlay (On/Off)
Limit line	On/Off, Single Limit, Multi-segment Edit, Limit Alarm (On/Off), Pass Fail Message (On/Off), Pass/Fail (Unbounded/Bounded), Warning Limit Offset, Clear Limit
Save/Recall	Setups, Measurements (.vna, .dat), Screen Shots (.jpg) (save only)
Application options	Bias-Tee (On/Off), Impedance (50 Ω, 75 Ω, Other)
Frequency	2 MHz to 4 GHz
Frequency accuracy	≤ ± 2.5 ppm @ 25 °C
Frequency resolution	1 kHz (RF immunity low), 100 kHz (RF immunity high)
For detailed specifications please see: Anritsu S332E Data Sheet