AEMC 6550 Megohmmeter Insulation Test Set
No stress rentals! We help you to choose the equipment that you need, we expedite shipment, and follow up.
Features & specifications
- True Megohmmeter®
- Fixed or programmable test voltage from 40V to 10kV
- Wide measurement range from 10kΩ to 25TΩ
- 5mA charging current, step voltage testing, ramp voltage testing
- Automatic calculation of DAR / PI / DD /δR (ppm/V) ratios
- Voltage ramp and step with Burn-In, Early-Break and I-Limit modes
- Large, backlit graphical LCD screen with digital display
- Bargraph and R(t)+V(t), I(t) and I(V) graphs
- Includes DataView® software
| Test voltages | 500V 1000V 2500V 5000V 10,000V |
|---|---|
| Insulation ranges | 10kΩ to 2000GΩ 10kΩ to 4000GΩ 10kΩ to 10,000GΩ 10kΩ to 15,000GΩ 10kΩ to 25,000GΩ |
| Voltage test/Safety test | 0 to 2500Vac; 0 to 4000Vdc |
| Capacitance measurement | 0.005 to 9.999μF; 10.00 to 49.99μF |
| Leakage current measurement | 0 to 8mA |
| Discharge after test | Yes, automatic |
| Other test stop modes | I-Limit: 0.2 to 5mA, programmable Early Break: di/dt Timer: Up to 99 minutes 59 seconds |
| Burn Mode | Constant testing |
| Ratio calculation | PI, DAR, DD |
| Calculation of R at ref. T° | Yes |
| Measurement Display Filter | 3 filters with 3 possible time constants |
| Graphs on Display | R(t) + V(t); I(t); I(V) |
| Storage | 256 registers, stores 80,000 points; R, V, I, and date |
| Communication | USB optically isolated port |
| PC software | DataView® |
| Power supply | Two NiMH rechargeable 9.6V 4Ah battery packs External charging voltage: 90 to 260V at 50/60 Hz Battery charging allowed while performing insulation measurements |
| Weight / Dimensions | 13.7 lbs. (6.2 kg) / (13.39 x 11.81 x 7.87) in. (340 x 300 x 200) cm |