Fluke DSX-5000 CableAnalyzer™

Fluke DSX-5000 CableAnalyzer™
  • Features of the DSX-5000

  • Versiv™ accelerates every step of the testing process
  • ProjX™ management system eases tasks from set-up to acceptance
  • Taptive™ user interface even novice technicians to get results quickly
  • LinkWare™ software produces excellent test results and reports
  • Ten second Cat 6A test time is the fastest way to gain certification
  • Manage up to 12,000 test results with full graphics
  • 1 billion links reported on LinkWare™ management software

Fluke DSX-5000 Specifications
Shielded and unshielded pair LAN cabling TIA Category 3, 4, 5, 5e, 6, 6A: 100Ω ISO/IEC Class C, D, E, EA, F, and FA: 100Ω and 120Ω
Permanent link adapters Plug type: shielded RJ45. Optional Plug type: Tera
Channel Adapters Jack type: shielded RJ45. Optional Jack type: Tera
TIA standard Category 3, 4, 5, 5e, 6, 6A per TIA 568-C.2
ISO/IEC standard Class C and D, E, Ea, F, FA certification per ISO/IEC 11801:2002 and amendments
Maximum frequency 1200 MHz
Speed of Autotest Full 2-way Autotest of Category 5e or 6/Class D or E: 9 seconds
Full 2-way Autotest of Category 6A/Class EA: 10 seconds
Input protection Protected against continuous telco voltages and 100 mA over-current. Occasional ISDN over-voltages will not cause damage
Display 5.7 in LCD display with a projected capacitance touchscreen
Case High impact plastic with show absorbing overmold
Dimensions Main Versiv unit with DSX-5000 module and battery: (2.625 x 5.25 x 11.0)in. (6.67 x 13.33 x 27.94)cm
Weight Main Versiv unit with DSX-5000 module and battery: 3 lbs, 5oz (1.28 kg)
Main unit and remote Lithium ion battery pack, 7.2 V
Typical battery life 8 hours
Charge time Tester off: 4 hours to charge from 10% capacity to 90% capacity
Languages supported English, French, German, Spanish, Portuguese, Italian, Japanese and Simplified Chinese
Calibration Service center calibration period is 1 year